Existing PUF Roofs

Bondit

Bondit

Bondit

Product Description

Product Description

Bondit allows for instant compatibility of Topps Seal® solvent based products over stable black bituminous systems for resurfacing them with rubber durability and the Topps Seal Energy Star® protective layer. Its tenacious adhesive bond to asphalt bitumen on the bottom side also becomes a barrier to asphalt to prevent discoloring the finish coat. The strong chemical affinity of Bondit to Topps Seal on the top is inseparable, making the system complete. Bondit dries in as little as 2 hours for quick project completion.

Specifications

Specifications

Wet Material:

Color

Milky/Clear

Viscosity

Water Thin

Weight per gallon

4.0 – 4.5 kg.

Solids

36.5% min.

pH

˂8.5

VOC

0 g/l

Dry to touch @ 25ᵒC (50% rel. hum)

2 hours

Cured Coating:

Ultimate Elongation

750%

Tensile strength

3.8 N/mm²

Tg

0ᵒC.

Resources

MultiUse Cleaner

MultiUse Cleaner

MultiUse Cleaner

Product Description

Product Description

This economical alkaline based cleaner is as perfect for heavy duty jobs as it is for use in regular cleaning. A simple change in concentration turns the formula into a cleaning powerhouse suitable for most any project. Proven effective in so many every day and industrial applications, this cleaner cuts through grime across a variety of conditions. This complex make-up combines 10 ingredients – twice that of ordinary cleaners. Three uniquely different surfactants and an active wetting agent carry the cleaner deep in between dirt particles, where it rapidly begins to dissolve the grease, oil, and other airborne pollutants which bind grime to surfaces. The dirt then releases as particles suspended in water, where it simultaneously is removed while washing, without requiring a rinse in most applications. Start with 118-177 ml. per liter of clean water when using a power-wash. Use more where needed. Apply full strength direct to heavier soiled areas such as warehouse floors, roofs or pavement and scrub with a stiff brush prior to flushing it away.

Specifications

Specifications

Wet Material:

Viscosity

Water Thin

Weight per gallon

3.8 – 3.9 kg.

Solids by weight

1.4%

VOC

10 g/l

pH 9.5 - 11

9.5 - 11

Resources

PolyCore

PolyCore

PolyCore

Product Description

Product Description

PolyCore™ stitch bonded 100% polyester reinforcing membrane makes every repair stronger. The precisely spaced warp provides integrated channels for the liquid rubber to flow through, interlocking and further increasing dimensional integrity. PolyCoreII™, with its flatter profile, permits complete encapsulation with less coating

Specifications

Specifications

Wet Material:

Weight

0.91kg/9m²

Tensile Strength (min.)

25kg

Elongation

60%

Mullin Burst

79 kg

Trapezoid Tear

7 kg

Resources

Polyprene

Polyprene

Polyprene

Product Description

Product Description

Heavily plasticized and fibered all rubber Polyprene makes repairs and can`t get brittle because it contains no bitumen or other vulnerable compounds. Versatile and easily installed between laps or anywhere that repair is required. Perfect where materials of differing coefficients meet and total flexibility is required. Replaces ordinary asphaltic cements with approximately 5x the strength and 10x the elongation. The unusual compound that provides a very high solid content also results in very minimal shrinkage and a high build at areas where a durable seal is typically needed most. Available both in heavy brush grade for general use, trowel grade for areas where a stiffer cement is required, and caulk cartridges for those difficult to get to areas. Applies quickly and easily with a stiff brush or rubber glove in one layer without threat of mud cracking. Ready to use with no mixing. Will not dry out or become brittle at cold temperature extremes. Use in conjunction with PolyCore™ reinforcing membrane where added reinforcement is needed. 1 liter covers 6 linear meters at 5 cm wide and 5 mm. thickness.

Specifications

Specifications

Wet Material:

Viscosity

400 pen.

Weight per gallon

4.0 – 4.2 kg.

Solids

66%

Flashpoint of solvent

40ᵒC

VOC

˂350 g/l

Dry to touch @ 25ᵒC (50% rel. hum)

12 hours

Cured Coating:

Ultimate Elongation

850%

Ultimate tensile strength

4.1 N/mm²

Peel Adhision

4.3 pli min.

Water vapor permeability

0.35 perms

Moisture absorption (7 day submers)

0.25 perms

Service temperature

-40ᵒ - 60ᵒC

Moisture Resistance

˂4 hours

Resources